How fast should you reel in a spinner?


How fast do you reel a spinnerbait? Option 1: Most of the time the best retrieval speed is going just fast enough to make blades spin. If you fish your spinnerbait too fast it will roll on its side. If you see this you have to slow down your retrieval speed.In this case, you might have to crank the reel a little bit fast it could be 15 to 20 times in every 10 seconds. It would help if you always remembered that using the perfect crankbait is a must issue here. If the fishes do not see the crankbaits easily, then you will fail to catch them.

Should I reel in a fish fast or slow?

Retrieve speed is one of the most overlooked factors in angler success. Work a bait too slow and the fish get too good of a look at it, which can cause finicky fish to shy away from striking. Conversely, a bait burned through an area too quickly can be in and out of the strike zone before a bass even knows it’s there.

How deep do you fish a spinnerbait?

Spinnerbaits are a type of fishing bait that are well suited to catching bass. You can use a spinnerbait in a variety of fishing scenarios, but they work best in clear, shallow water that is less than 10 feet (3.0 m) deep.

See also  Do fish like garlic worms?

How fast should you reel in lures?

The best reel speed for crankbait lures is 21 inches per turn of the handle.

What is the best gear ratio for spinnerbaits?

Spinnerbaits: For spinnerbaits, a moderate retrieve reel of around 6.3:1 ratio will perform adequately. This speed allows for power to move larger bladed baits through the water, but also has the speed to burn in baits when need be.

Do you put a worm on a spinnerbait?

Bass might short strike a spinnerbait with a full 7-inch plastic worm attached so I cut the worm in half to create a shorter trailer with a lot of tail action. With that setup I have more bass attacking the blade bait than nipping at the plastic trailer.

What are fast reels good for?

High-speed reels tend to be used more for lure casting that require a lure to be worked quickly like spinning for mackeral with a metal lure or when line needs to be recovered between sweeps, such as when popping for GT’s.

What does high speed in reel mean?

Anything above 5-to-1 is considered high speed for spinning reels. There are reels on the market that offer faster gears, up to 8-to-1, but most of those high-gear reels have a smaller spool. This is an excellent reel when the water is clear, and you want to: Cast quickly and far away from your boat.

What are high speed reels good for?

High gear ratio reel | 7.1:1 thru 8.1:1 A fast reel also helps when fighting a big bass-you need all the speed you can get in order to quickly pull it away from any line-fraying hazards. Topwaters, jerkbaits, jigs, plastics and even lipless crankbaits warrant the use of a high speed reel.

What do you use a high speed reel for?

A high speed reel is my choice for techniques like flippin’ and pitching or worming — anything where you’re working the bait for a short stretch and then hustling it in to make another presentation.

How fast do I reel crankbait?

The correct speed of any crankbait reel is 21 inches of line pick-up per turn of the reel handle.

What are high speed reels good for?

High gear ratio reel | 7.1:1 thru 8.1:1 A fast reel also helps when fighting a big bass-you need all the speed you can get in order to quickly pull it away from any line-fraying hazards. Topwaters, jerkbaits, jigs, plastics and even lipless crankbaits warrant the use of a high speed reel.

See also  Is high tide good for fishing?

What is the best gear ratio for a fishing reel?

A gear ratio of 4.9:1 is great for all-around use of lures as well. Don’t worry if your gear ratio is slower though, you can still work lures effectively. You’ll just have to put in extra effort to reel faster.

What is a 7.0 1 gear ratio good for?

So, buying a reel with a 7.0:1 gear ratio, which retrieves line pretty quickly, might be good for covering lots of water with a spinnerbait to locate active fish.

What is a 7.1 1 gear ratio good for?

7.1:1 to 9.0:1 – This has become the reel speed range we use most often. This reel gets used for Flippin’, Froggin’, deep jigs, swim jigs in warmer weather, soft plastic stickbaits, topwater and late season jerkbaits.

What is a 6.2 1 gear ratio good for?

It takes experience to fish slowly with a high-speed reel so buying a middle-speed model in the 5.4:1 to 6.2:1 range allows novices to fish both slow- and fast-moving baits easier. They can wind the reel slow enough to slow-roll a spinnerbait or run a deep-diving crankbait without overworking the lure.

Should I use a swivel with a spinner?

Many spinner fishermen prefer fishing with a snap swivel. The only advantage to this is it allows them to change lures quickly. We do not recommend attaching a spinner directly to a swivel. Most fishermen use a swivel that is way too big and this can interfere with the action of the lure.

Why do you need a 2 speed reel?

“Higher speeds let the angler fish jigs and lures at a faster pace, but lower gears allow them to put more torque on a fish.”

What is a 7.1 1 gear ratio good for?

7.1:1 to 9.0:1 – This has become the reel speed range we use most often. This reel gets used for Flippin’, Froggin’, deep jigs, swim jigs in warmer weather, soft plastic stickbaits, topwater and late season jerkbaits.

What is a 5.2 1 gear ratio good for?

The low gear ratios like 5.2:1 and 5.3:1 are great for fishing baits that pull hard like deep crankbaits, big swimbaits, and deep water spinnerbaits. The low gear ratio helps you reel the bait slower, keeping it in the strike zone longer when fishing moving baits in the deep water.

What spinning reel has the fastest retrieve?

The KastKing Speed Demon Elite spinning reel is the fastest spinning reel yet! A KastKing Speed Demon Elite is a fishing reel in a class of its own. With the world’s fastest 7.4:1 spinning reel gear ratio, and using the best components, it is the gold standard of spinning reels.

See also  What is small scale commercial fishing?

What is a 7.5 1 gear ratio good for?

So, in the case of a baitcasting reel, a reel with a 7.5:1 gear ratio will retrieve 60 feet of line much more quickly than a reel with a 4.5:1 gear ratio. This principle is what causes anglers to say that 7.5:1 is a high gear ratio. In reality, though, it’s not higher, just faster to retrieve line.

Is HG or XG better?

High gearing reels offer a good compromise between retrieve speed and power. Extra-High Gearing (XG) is designed for anglers looking for ultra-fast retrieve speeds. XG gearing is ideal for anglers looking to target fast moving fish like tuna, trevally and mackerel using topwater lure presentations.

Which speed is fastest on reels?

To adjust the playback speed of your Reel, locate the Playback icon (1x, right below the music icon). From there, you can choose . 3x, . 5x, 1x (normal speed), 2x, 3x, or 4x.

What is a 7.3 1 gear ratio good for?

It is a reel speed that can really work for just about everything,” he says. While many like to crank with slow retrieves, a 6.6:1 and 7.3:1 Revo STX are Card’s favorites for cranking. “I burn a squarebill a lot and for that I’ll use the 7.3:1. It’s also a great choice for ChatterBaits and swimbaits,” he shares.

What makes a spinning reel good?

A smooth, high-quality drag system is essential for a good spinning reel. The drag system should let out line in a smooth, seamless manner, without pulls and jerks as the line goes. If it jerks and stutters like a car with a bad transmission, it may not be the right choice of reel.

Leigh Williams
Latest posts by Leigh Williams (see all)