What speed do you troll at?


It is important to have similar lures that all work well together. Common lure trolling speeds will vary from six knots to 12 knots.

How fast should I troll?

Trout typically like faster trolling speeds around 1.5 to 2.0 mph. Slower speeds may work better in cold water in winter, but generally trout are looking to chase forage items. Let the fish determine what speed will entice the bite. Start at 1.5 mph and troll in S-patterns.

How fast do you troll plugs?

We typically fish at 9 knots, looking for that instinctive bite. Our main troll presentations include fresh bait behind plugs, using fluorocarbon leaders to get more strikes. Nine knots allows the bait to look natural in the water, with the right movement and bubble stream, without washing the baits out quickly.

What speed do you troll for bass?

It takes a bit of experimenting to get the speed right, but for typical bass crankbaits it’s anywhere from 2 to 4 mph–you can tell prime speed because that’s where the rod bows up most.

How fast do you troll with a Rapala?

“We troll at two miles-per-hour and all we catch is white bass and sheephead,” Holst explains. “We throw a little speed at these fish, and all we catch is walleyes.”

How fast do you troll plugs?

We typically fish at 9 knots, looking for that instinctive bite. Our main troll presentations include fresh bait behind plugs, using fluorocarbon leaders to get more strikes. Nine knots allows the bait to look natural in the water, with the right movement and bubble stream, without washing the baits out quickly.

See also  When should I use a swivel when fishing?

What depth do you troll in?

Your trolling should be concentrated close to or in the thermocline for best results. It will be from 15 to 50 feet down in most lakes, depending on size and depth.

What bait is best for trolling?

Skirted lures are more effective for chasing bigger fish, while soft plastics are better suited for trolling for smaller game. Spoons and plugs are versatile options, and they fall somewhere in the middle. For saltwater trolling, squid, ballyhoo, mullet, and mackerel are go-to baits for most anglers.

How far behind the boat should you troll?

What size rod is best for trolling?

Trolling rods tend to be longer than your average fishing rod. More specifically, trolling rods tend to measure between 5.5 and 10 feet long with the perfect length depending on your specific conditions and angling skill.

Is braid or mono better for trolling?

Mono holds knots better and costs less than braid. It also works better on smaller bait-casting reels because light braid can dig into itself. Florida sailfish and dolphin anglers still use a lot of mono on the troll, and some use it for kite lines because it runs through the clips better.

Do you troll with the tide or against?

During high tides, the neighboring bars and flats often harbor the majority of fish, which tend to spread out to hunt for food. Most species can be caught by trolling both with the tide and against it.

How much line should I let out when trolling?

Let out 50 feet of line and clip into the release. If that’s not enough distance to prevent your lake’s wary walleyes from seeing the ball…then let out 150 feet of line! Just remember, the flat-line diving depth of your crankbait still applies behind the ball!

How long should my line be for trolling?

Determining Trolling Depth The tournament veteran estimates he casts out about 70 to 80 feet of line to begin long lining. “If you take the same size jig and cast it out as hard as you can to reach that 70- to 80-foot mark, you are going to do it time and time again at about the same length,” he said.

See also  Is fishing a sport yes or no?

Is it better to troll upstream or downstream?

For all those reasons, trolling downstream is the best way to get at them. By going downhill, you can crank up the trolling speed — which allows you to cover more water and, thus, find the fish more quickly.

How much weight should I use for trolling?

Boat weight is the most important consideration to take into account when choosing a trolling motor. A beginning rule of thumb is that you want a minimum of 2 lbs of thrust for every 100lbs. For example, if you have a 3000lb boat, fully loaded, then the calculation is (3000/100) * 2 = 60lbs of thrust.

How long should my line be for trolling?

Determining Trolling Depth The tournament veteran estimates he casts out about 70 to 80 feet of line to begin long lining. “If you take the same size jig and cast it out as hard as you can to reach that 70- to 80-foot mark, you are going to do it time and time again at about the same length,” he said.

How much line should I let out when trolling?

Let out 50 feet of line and clip into the release. If that’s not enough distance to prevent your lake’s wary walleyes from seeing the ball…then let out 150 feet of line! Just remember, the flat-line diving depth of your crankbait still applies behind the ball!

How fast do you troll plugs?

We typically fish at 9 knots, looking for that instinctive bite. Our main troll presentations include fresh bait behind plugs, using fluorocarbon leaders to get more strikes. Nine knots allows the bait to look natural in the water, with the right movement and bubble stream, without washing the baits out quickly.

Do you use weight when trolling?

If you want to get the most out of this technique, remember that snap weight trolling is highly speed dependant. The slower you go, the deeper the lure will run. This also applies to the amount of weight you use, heavier weights are also going to take your lure deeper.

What line should I use for trolling?

Monofilament is the best line choice for trolling in most situations, but there are times when low stretch lines have the edge. Because low stretch lines are super thin, they enable trolling lures like crankbaits to pick up significantly more depth compared to monofilament lines of the same break strength.

See also  What size fishing rods are best for rock fishing?

Should you troll with or against the wind?

Trolling with the wind is the most important. You are able to maintain your speed better when motoring downwind than if you were bucking waves head on. Also, when heading into the wind, gusts of wind will grab the nose of your boat, whether it’s aluminum or fiberglass, and spin you off course.

Do you set the hook when trolling?

Setting the Hook While Trolling These open water fish strike with speed and turn away, allowing the hook to be pulled to the side and embed itself into the fish’s mouth. This is why when a fish bites, the first thing you hear is the drag winding out. That indicates the hook is set, and the fish is on.

Do you need a swivel when trolling?

For fishing with spoons such as a Kastmaster, you only need to use a swivel if you’re trolling. For casting and retrieving and jigging, the spoon won’t spin enough to cause a line twist, so you can tie it directly to your line.

What are the disadvantages of trolling fishing?

It found that many troll-caught fish become hooked in locations other than the mouth. The study found that this increases the likelihood of fatal wounding, especially if the gills are damaged. For fish hooked through the gills, 85% died.

Do sinkers go above or below the bobber?

Attach a sinker above the hook. Choose a sinker that’s enough to hold your line down, but not so heavy that it pulls the bobber underwater. If you notice your bobber dipping below the surface after you cast, you may need to use a lighter sinker.

Leigh Williams
Latest posts by Leigh Williams (see all)